| Re: [GMCnet] Intake cross over block - looking for opinions [message #221812] |
Mon, 09 September 2013 16:50 |
 |
hnielsen2
Messages: 1434
Registered: February 2004
Location: Alpine CA
Karma:
|
Senior Member |
|
|
Tom
We have been running with block offs for I can't remember how long.
With Howell TBI.
Howard
Alpine Ca
74 Canyon Lands
455 not quite stock
All is well with my Lord
Never Give Up
On Sep 9, 2013, at 10:13, tom geiger <tgeiger@burnsmcd.com> wrote:
>
>
> I've been trying to button up the exhaust leaks on my engine. I had the exhaust gaskets blow out again, for the second time and ordered the Remflex from Jim and had my mechanic put them in. In his effort he did a smoke test and said that the intake gaskets were leaking exhaust as well, so I'm going to have him replace those. So here is my question. I have the chance to block off the ehaust ports if I should. My mechanic was questioning doing that. First question is, would I really want to block that port? Would it not cause back pressure on the gasket and possible develop a exhaust leak again with it? And if I plan on going eventually to a TBI system, would the boiling issue go away anyhow? To date I have not experienced anytime of boiling issue with it.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
