Intake cross over block - looking for opinions [message #221768] |
Mon, 09 September 2013 12:13 |
tgeiger
Messages: 518 Registered: February 2006 Location: kansas city
Karma:
|
Senior Member |
|
|
I've been trying to button up the exhaust leaks on my engine. I had the exhaust gaskets blow out again, for the second time and ordered the Remflex from Jim and had my mechanic put them in. In his effort he did a smoke test and said that the intake gaskets were leaking exhaust as well, so I'm going to have him replace those. So here is my question. I have the chance to block off the ehaust ports if I should. My mechanic was questioning doing that. First question is, would I really want to block that port? Would it not cause back pressure on the gasket and possible develop a exhaust leak again with it? And if I plan on going eventually to a TBI system, would the boiling issue go away anyhow? To date I have not experienced anytime of boiling issue with it.
Tom Geiger
76 Eleganza II
KCMO
|
|
|