GMCforum: GMCnet » Holding tank crack repair

Home » Public Forums » GMCnet » Holding tank crack repair ( How to. What's best)

Show: Today's Messages :: Polls :: Message Navigator

Holding tank crack repair [message #221554]

Sat, 07 September 2013 20:36

JohnL455

Messages: 4447
Registered: October 2006
Location: Woodstock, IL

Karma:

Senior Member

My 77 EII has a 1" crack at back on right side near the dump valve neck. I have gotten the previous repair glop off by pulling at it with needle nose. I bought a caulk tube of white leak stopper that drys clear. Or should an RV shop do some plastic welding?

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

[Message index]

		Holding tank crack repair By: JohnL455 on Sat, 07 September 2013 20:36
		Re: [GMCnet] Holding tank crack repair By: Emery Stora on Sun, 08 September 2013 09:32
		Re: [GMCnet] Holding tank crack repair By: James Hupy on Sun, 08 September 2013 11:49
		Re: [GMCnet] Holding tank crack repair By: willietrucker on Sun, 08 September 2013 17:03
		Re: Holding tank crack repair By: winter on Sun, 08 September 2013 17:11
		Re: Holding tank crack repair By: willietrucker on Sun, 08 September 2013 17:29
		Re: Holding tank crack repair By: Ken Burton on Sun, 08 September 2013 22:24
		Re: Holding tank crack repair By: Adrien G. on Mon, 09 September 2013 00:19
		Re: Holding tank crack repair By: JohnL455 on Mon, 09 September 2013 08:07
		Re: Holding tank crack repair By: JohnL455 on Mon, 09 September 2013 08:43
		Re: Holding tank crack repair By: JohnL455 on Mon, 09 September 2013 10:20
		Re: [GMCnet] Holding tank crack repair By: Emery Stora on Mon, 09 September 2013 10:31
		Re: Holding tank crack repair By: JohnL455 on Mon, 09 September 2013 14:47

Previous Topic:	[GMCnet] A tale of two coaches
Next Topic:	[GMCnet] A tale of two coaches

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Mar 18 16:36:49 CDT 2025

Total time taken to generate the page: 0.01384 seconds