[GMCnet] distributors [message #220028] |
Mon, 26 August 2013 18:27 |
mjbourgon
Messages: 259 Registered: May 2010
Karma:
|
Senior Member |
|
|
Good afternoon all.
My friend Gary has been having a problem with his engine. He was
running on seven cylinders and could not find out what the problem was.
We decided to pull the distributor cap and take a look. The pin on the
cap for #7 cylinder was just about gone. Inside the cap the connection
was pulled down and not making any connection to the rotor. This was
almost too simple but had been overlooked by several mechanics. We
replaced the cap and the coil and voila, all is now good. Some times we
overlook the simple things and think we need to attack our old beast
with more expensive fixes. As a trouble shooter when I was in the air
force the rule was start with the simple things first. Rule one K.I.S.S.
Just a thought. Somebody has already invented the space shuttle
Marcel in El Paso
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|