| [GMCnet] The final production run of alignment kits is now available [message #218328] |
Wed, 14 August 2013 14:33 |
glwgmc
Messages: 1014
Registered: June 2004
Karma:
|
Senior Member |
|
|
Hi all,
I was able to make one last production of the GMC alignment kits. They are $350 plus $20 shipping west of the Rockies and $40 east. The available kits will be allocated in the order in which your payment and shipping address is received. Thanks. Info on the kits, how to properly do the alignment and set ride height is on the GMC page on my web site http://jerrywork.com. All you need is a relatively level spot and 30 to 60 minutes (if your ride height is already set). To set ride height correctly is an iterative process that will take longer as you need to jack up the coach, put safety jack stands in place, use the correct torsion bar unloading tool, make an adjustment and then drive the coach for two to five miles to fully settle the suspension. Most of the time you will get it on the second or third try.
This is the last run I will make of these kits as it just makes too big a mess in my furniture making studio to cut up all the metal square tube on my 24" band saw. I most often use water based finishes on my fine furniture pieces and if just one fleck of metal gets on the wood under the finish it will rust and ruin the piece. Don't ask me how I know!
Send a check and your shipping address to me at PO Box 3195, Kerby, OR 97531. If you want to pay via Paypal (that same email address is the Paypal account ID), add $15 to cover the Paypal fees. Thanks.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
Visitors always welcome!
glwork@mac.com
http://jerrywork.com
541-499-1027
541-592-5360
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
