GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] New Problem!
[GMCnet] New Problem! [message #217728] Sun, 11 August 2013 02:20 Go to previous message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
Senior Member
Today we left Gordon & Lucie Seykora's place in Nanaimo, BC and moved to
Victoria. Because Saturday night is when they have the big fireworks
spectacular at Butchart Gardens, we wanted to be there. We checked into a
campground 10 miles from the gardens and departed immediately to see the
gardens.

About half way there, the PS pump began to howl. I had a fresh quart of
fluid aboard, so we were under way again quickly, but not for long. The
howl quickly returned. Parked at the gardens, I quickly found the
problem: blown pitman shaft seal.

I drove back to the RV park with little difficulty since above 15 mph or
so, I barely missed the boost. While there are other options, the one that
most appeals to me at the moment is to get on the ferry back to Port
Angeles when we finish our sightseeing here. From there, it's only 72
miles to the Seattle ferry terminal at Bainbridge Island. I can get the
box rebuilt there more easily than anywhere short of there.

Question is, will the pump stand up to that long a trip with no fluid? I
don't mind replacing the pump too, but I don't want to wind up disabled
before I can do so.

Any experience?

Ken H
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Macerator issue solved
Next Topic: steering slip shaft and cv joint
Goto Forum:
  


Current Time: Wed Sep 25 13:27:27 CDT 2024

Total time taken to generate the page: 0.00499 seconds