Re: [GMCnet] never a dull saturday [message #214269] |
Sat, 13 July 2013 21:18 |
|
hnielsen2
Messages: 1434 Registered: February 2004 Location: Alpine CA
Karma:
|
Senior Member |
|
|
Joe
Do you have a large lumber yard in your area?
If not look for Baltic Ply Wood.
Here in San Diego I can buy 5X5' sheets about 3/4 "
It's all metric sized
Howard
Alpine Ca
74 Canyon Lands
All is well with my Lord
On Jul 13, 2013, at 7:03 PM, Joe Weir <joeweir@gmail.com> wrote:
>
>
> Block did not make it back from the machine shop. So, full of ambition from my visit to the Coop, I decided to swap out my seat bases for offset late model ones. However removing the stock base provided a little surprise.
>
> New GMC Shopping rule:
>
> If the side ashtray is rusted out, the floor under the window probably looks like this:
>
> http://www.gmcmhphotos.com/photos/mechanical/p49922-photo11.html
>
> One of the POs was gracious enough to "repair" the leak by pouring epoxy on the rotted wood...It was mush all around the epoxy.
>
> So in case anyone is wondering what the aluminum framing looks like under the floor:
>
> http://www.gmcmhphotos.com/photos/showfull.php?photo=49919
>
> and the detail on the routed deck:
>
> http://www.gmcmhphotos.com/photos/showfull.php?photo=49921
>
> It looks as if one could build up the deck by using 2 layers of 1/4" and a center layer of 1/2" plywood glued together, if one was not handy with a router. I may have to try this.
>
> Not having any luck finding marine plywood, not that it helped the original stuff, so I will have to waterproof some regular plywood.
> --
> 76 Birchaven
> Columbia, SC.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|