[GMCnet] Seal between oil filter adapter and oil cooler adapter [message #213705] |
Mon, 08 July 2013 12:48 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma:
|
Senior Member |
|
|
G'day,
I just went to reassemble the oil filter adapter and oil cooler adapter. I took the seal out of the oil filter I removed and put it
in the groove in the oil cooler adapter as per conventional practice. I noted that the seal completely fills the groove in the oil
cooler adapter and extends above the metal by about 0.050. AFAIK this is not right.
I measured the groove for an O-ring and the dimensions are:
OD = 2.804
ID = 2.442
CS = 0.181
D = 0.120
Anybody know how to calculate the correct size O-ring to go into this groove?
Regards,
Rob M.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|