GMCforum: GMCnet » Re: [GMCnet] Finally about to pull the 403

Home » Public Forums » GMCnet » Re: [GMCnet] Finally about to pull the 403

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Finally about to pull the 403 [message #208956]

Mon, 27 May 2013 12:46

Messages: 1262
Registered: September 2009

Karma:

Senior Member

> I had similar symptoms to yours and was convinced it was a
> rod. Turned out to be 1 missing and 1 loose bolts on the torque converter.

Thanks Terry. Got any suggestions for how I can check those?
Do I have to pull the tranny, or can they been seen/accessed
from the round hole on the tranny housing?

thanks
Karen
1973 23'
1975 26'
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Karen 1975 26' San Jose, CA

Report message to a moderator

[Message index]

		Re: [GMCnet] Finally about to pull the 403 By: KB on Mon, 27 May 2013 12:46
		Re: [GMCnet] Finally about to pull the 403 By: kerry pinkerton on Mon, 27 May 2013 13:46
		Re: [GMCnet] Finally about to pull the 403 By: n6mon on Mon, 27 May 2013 19:55

Previous Topic:	[GMCnet] Tire Advice ~ Load Range
Next Topic:	[GMCnet] Installing P30 Master Cyl. HELP

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 10 23:30:25 CDT 2024

Total time taken to generate the page: 0.00756 seconds