GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » High Blower Relay
High Blower Relay [message #206828] Sat, 04 May 2013 16:59 Go to previous message
Wayne is currently offline  Wayne   United States
Messages: 106
Registered: August 2004
Karma:
Senior Member
Hi everyone,

My high blower is inoperative under all settings and conditions. Every thing else is fine. There was high resistance at the plug but now it is fixed. There is a feed wire, 14 red w double white stripes , at the high blower relay. That red wire ties in to a 18g fusible link.

I believe the fusible link is blown because I can't get power out of it under any conditions. If I bypass it with a wire direct to the batt everything works.

Does anyone know the easiest way to get to the fusible link. I have no problem making a new fusible link but is it supposed to tie in to the 12 batt or 12 ign?


Wayne Lawrence
76 Birchaven
Bellflower CA
w.lawrence@verizon.net
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: top bunk question
Next Topic: [GMCnet] in tank fuel pump
Goto Forum:
  


Current Time: Mon Oct 07 14:42:24 CDT 2024

Total time taken to generate the page: 0.01396 seconds