GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » steering gearbox thoughts
steering gearbox thoughts [message #205437] Sun, 21 April 2013 17:03 Go to previous message
skip2 is currently offline  skip2   United States
Messages: 544
Registered: September 2011
Location: Winter Haven,FL (center o...
Karma:
Senior Member
Found after trying to center my steering box again that it was a 4 1/4 stop to stop box rather than 3 1/3 stop to stop. Learned that this is because of no internal stops. My question is, what kind of extra strain does this do to all my new steering components, and any other thoughts of this type of gearbox. Another question if I was to replace it does the adjustment screw usually come set or does it still need to be set. Thanks again.
Skip Hartline


74 Canyon Lands, FiTech, 3.7 FD LSD, Manny Tranny, Springfield Distributor, 2001 Chevy Tracker Ragtop Towd
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Alcoa Wheel Recall
Next Topic: [GMCnet] Replacing the dinette for sleeping space in a 1976 GMC Eleganza II
Goto Forum:
  


Current Time: Tue Nov 12 00:15:40 CST 2024

Total time taken to generate the page: 0.01863 seconds