Trans filter [message #205300] |
Fri, 19 April 2013 21:52 |
Hal StClair
Messages: 971 Registered: March 2013 Location: Rio Rancho NM
Karma:
|
Senior Member |
|
|
I replaced the trans filter today and am a little worried about how loose it seemed to fit the case. I used a Wix 58882 filter and replaced the o-ring but it still felt loose. I have a Ragusa pan on it and don't know if it is supposed to support the filter or not.
Also, I added 5 qts of fluid which seems to be at least a quart less than I removed.I know the book says 4 qts and the pan is supposed to add an extra qt of capacity but it seems the PO had more fluid in it. I don't know if I can trust the dipstick readings.
Any help will be appreciated.
Thanks,Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|