GMCforum: GMCnet » "Multiple temp readings with one gauge and selector switch."

Home » Public Forums » GMCnet » "Multiple temp readings with one gauge and selector switch."

Show: Today's Messages :: Polls :: Message Navigator

"Multiple temp readings with one gauge and selector switch." [message #204831]

Tue, 16 April 2013 14:34

Bruce Hart

Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming

Karma:

Senior Member

I want to install one temperature gauge that can read three different sensors- water, oil, and transmission temperatures. I have found a SunPro gauge CP-7956 with a sensor CP-7576 but can't find a selector switch. Has anyone done this before? I remember someone suggesting that it could be done a few months back in the forum and thought that would be a great way of having the gauges with the least bit of space. Any suggestions on where to find a three or four position selector switch? A Napa representative suggested to use an air conditioner selector switch, and I have even seen a heater fan switch but all of these seemed too bulky and ugly for what I want.

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

Report message to a moderator

[Message index]

		"Multiple temp readings with one gauge and selector switch." By: Bruce Hart on Tue, 16 April 2013 14:34
		Re: [GMCnet] "Multiple temp readings with one gauge and selector switch." By: sgltrac on Tue, 16 April 2013 14:57
		Re: "Multiple temp readings with one gauge and selector switch." By: Ken Burton on Tue, 16 April 2013 15:22
		Re: "Multiple temp readings with one gauge and selector switch." By: Ken Burton on Tue, 16 April 2013 15:29
		Re: [GMCnet] "Multiple temp readings with one gauge and selector switch." By: Dave Mumert on Tue, 16 April 2013 15:38
		Re: "Multiple temp readings with one gauge and selector switch." By: Chr$ on Tue, 16 April 2013 16:29
		Re: "Multiple temp readings with one gauge and selector switch." By: WD0AFQ on Tue, 16 April 2013 17:02
		Re: [GMCnet] "Multiple temp readings with one gauge and selector switch." By: jhbridges on Tue, 16 April 2013 18:37
		Re: [GMCnet] "Multiple temp readings with one gauge and selector switch." By: Bruce Hart on Wed, 17 April 2013 08:40

Previous Topic:	[GMCnet] 1977 GMC Fixer-Upper in Wisconsin
Next Topic:	Chassis battery side diagnosis

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 23 12:19:59 CDT 2024

Total time taken to generate the page: 0.01562 seconds