| [GMCnet] Alignment kits available again [message #203222] |
Sun, 31 March 2013 19:41  |
glwgmc
Messages: 1014
Registered: June 2004
Karma:
|
Senior Member |
|
|
Hi All,
Only two of the GMC motorhome alignment kits are left so if you want one, be sure to let me know ASAP. The redesign is quite spiffy and makes the kits much easier to store and ship around. In addition to several of the clubs and a bunch of individuals now using the alignment kit, a number of our well known GMC specialists also have one. So far the feedback has all been quite positive and the simplifications incorporated into this version 2 should make it just that much better/easier to use. I am having the turn plates drop shipped to save the duplicate shipping costs and the rest of the kit now fits into a 5 x 5 x 30 inch box. "Assembly" is just screwing in four stainless steel machine screws. Everything is now self calibrating so you are good to go right out of the box.
Best of all, I was able to lower the price from $400 to $350 if I supply the laser/angle finder or $300 if you buy that yourself locally. Flat rate shipping is $50 for addresses east of the Mississippi River, $40 for addresses west of the River and $30 for addresses in Washington, Oregon and California. Shipping to Canada or elsewhere in the world will be the actual shipping charge. Paypal to glwork@mac.com or send a check to Jerry Work, PO Box 3195, Kerby, Oregon 97531. Be sure to include your shipping address.
Your coach drove straight and true when new, and it can again without road wander or rut follow if you get the tire air pressure, ride height and alignment properly set. With this kit you can quickly check ride height front and rear, steering box centering, frame parallelism on all six wheels, camber on all six wheels along with caster and toe on the two front wheels. You can do all these checks anywhere there is a roughly level parking area yourself in less than 30 minutes. And, you will be as accurate if not more accurate than most commercial alignment shops. Full instructions are included in the package.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
glwork@mac.com
http://jerrywork.com
541-592-5360
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
