GMCforum: GMCnet » [GMCnet] Door widening project up date.

Home » Public Forums » GMCnet » [GMCnet] Door widening project up date.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Door widening project up date. [message #200374]

Sat, 02 March 2013 18:03

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

I'm back on the project. I cut and fit the panels of composite siding, and alum panels in the door yesterday. Today I used 3M body panel adhesive to secure what couldn't be welded. Letting it all dry till Monday morning. Then put the fiber glass mat, and resin on. Then the body filler to smooth things out. I got my walnut material for the interior. The 2 ramps have been ordered. One is 8 ft for the outside. And a 5 ft, so Linda can set up in the drivers area. Alabama is getting close. I'll make the dead line. Bob Dunahugh Cedar Rapids, Iowa
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Door widening project up date. By: BobDunahugh on Sat, 02 March 2013 18:03
		Re: [GMCnet] Door widening project up date. By: kerry pinkerton on Sat, 02 March 2013 18:11
		Re: [GMCnet] Door widening project up date. By: Kingsley Coach on Sat, 02 March 2013 18:29
		Re: [GMCnet] Door widening project up date. By: sgltrac on Sat, 02 March 2013 20:29

Previous Topic:	[GMCnet] Avion Rear Window Cabinet
Next Topic:	[GMCnet] GMC sighting New Mexico Plates

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Jan 10 03:54:47 CST 2025

Total time taken to generate the page: 0.01501 seconds