[GMCnet] For Sale 455 C heads Ported and polished [message #192528] |
Fri, 07 December 2012 20:43 |
Marcus McGee
Messages: 112 Registered: March 2004
Karma:
|
Senior Member |
|
|
I have a pair of 455 C heads that I had ported and some polishing done on them They were done by M&J Proformance in Ohio
They have the crossover plugged with poured in sealer.
They have been tapped for the use of Chevy studs for the rockers and I have the full set of of Harland Sharp roller rockers and locks for them from Comp Cams.
I will check on the valve sizes and types that were used but I know they have a 3 angle valve job and heavy duty valve springs.
The machinist knew what I was looking for in low end torque and designed the job around that parameter.
I have pictures of the heads and the rockers and studs for them,
I spent over $1700 on the entire set up and am taking offers for the entire set up. I would like to get at least $850 and they can be shipped UPS and have wooden cases for them.
I am in Rochester NY and can be reached directly at my email crsalert@frontiernet.net or call me at 585-690-2256.
I also have some new forged pistons and 8 Mondello polished and sized rods, 16 Mondello push rods, a Mondello harmonic balancer, and a Mondello cryogenic treated crank. I will post pictures and prices and specs on all of them.
I am moving all of my 455 parts that I have collected and will post them as I get the information.
Marcus McGee
Rochester NY
585-690-2256
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|