[GMCnet] Half a trans Canada rolling rally, final report [message #182920] |
Sun, 02 September 2012 12:02 |
glwgmc
Messages: 1014 Registered: June 2004
Karma:
|
Senior Member |
|
|
Will do, Jim. Good suggestion. I am replacing all the components on the bad wheel including the various levers like the auto adjuster arm but will make sure it is sharp and in good contact. On the other side all looks good and I had to insert an ice pick to push the auto adjuster out of the way in order to back the shoes off enough to get the drum off so I think that one is ok.
Travel safely and hug the co-pilot for me!
Jerry
Jerry Work
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
glwork@mac.com
http://jerrywork.com
541-592-5360
------------------------
Message: 14
Date: Sun, 2 Sep 2012 11:52:56 -0400
From: James Hupy <jamesh1296@gmail.com>
Subject: Re: [GMCnet] Half a trans Canada rolling rally, final report
To: gmclist@temp.gmcnet.org
Message-ID:
<CALxoeyswp+eZFJ2xeB4bseB6BUOwS7N_wLY7Lp9OiBLw88hhiQ@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Jerry, check the sharp edge of the adjuster arm that moves the starwheel.
If it is worn it will allow movement.
Jim Hupy
----------------------------
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|