GMCforum: GMCnet » New airbag brackets

Home » Public Forums » GMCnet » New airbag brackets

Show: Today's Messages :: Polls :: Message Navigator

New airbag brackets [message #180390]

Wed, 15 August 2012 15:25

PettyVTX

Messages: 363
Registered: April 2011
Location: Winder Ga.

Karma:

Senior Member

Well i have just about got my new airbag brackets done Thanks to all the new ideas from Mark and Sully I decided to make my own since I have access to a laser waterjet. I can tell you It makes some nice smooth cuts. The only drawback is it can only cut flat metal. So We cut all flat pieces and put tabs on the sides and cut slots in the plate to align everything up then tig welded the Bolt and nut on then slaped the top on and Done.Here are some pics.
http://www.gmcmhphotos.com/photos/member-galleries/p45181-plate21.html

Ex Avion now looking for a 23' Jeep Wrangler Towd

Report message to a moderator

[Message index]

		New airbag brackets By: PettyVTX on Wed, 15 August 2012 15:25
		Re: New airbag brackets By: Keith V on Wed, 15 August 2012 22:37

Previous Topic:	Leak points
Next Topic:	Counter Top Extension

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Mar 13 15:03:11 CDT 2025

Total time taken to generate the page: 0.00710 seconds