| Electro-Level I Hose Routing [message #173783] |
Mon, 18 June 2012 14:53  |
SThornbg
Messages: 127
Registered: September 2011
Karma:
|
Senior Member |
|
|
My driver's side air bag pumps up normally and holds well. However, it will not release pressure when the control switch is set to the down position. With the air bag removed, I find a 4 inch piece of hose attached to the exhaust port of the height control valve and the end appears to be cut, but I don't find a loose end of a hose that might have been connected to it. I have three hoses in the clamp on the wheel well wall and all are connected.
I don't find any good pictures of the connections and what pictures I do find in my downloaded copy of the manual are too dark to see much detail.
Any help would be much appreciated.
Steve Thornburg
South Bend, IN
77 PB 455 "Tinker Toy"
Steve Thornburg
South Bend, IN
77 exPB 455 "Tinker Toy"
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
