GMCforum: GMCnet » Here we go

Home » Public Forums » GMCnet » Here we go

Show: Today's Messages :: Polls :: Message Navigator

Here we go [message #173386]

Fri, 15 June 2012 11:37

PettyVTX

Messages: 363
Registered: April 2011
Location: Winder Ga.

Karma:

Senior Member

Got the neuwsed motor broke down. It had lots of water in the pan but i got to it before any rusting occured. pulled the cam and the crank. Only wear on the bearings was the cam brgs. It is all standard with GM brgs. The bore has hardly any wear still shows std with the Mic. Looks like i will be getting the new frame ready to go.Maybe i will be back on the road by Winter.

Ex Avion now looking for a 23' Jeep Wrangler Towd

Report message to a moderator

[Message index]

		Here we go By: PettyVTX on Fri, 15 June 2012 11:37
		Re: Here we go By: Dennis S on Fri, 15 June 2012 11:56
		Re: Here we go By: 94nubble on Fri, 15 June 2012 14:26
		Re: Here we go By: PettyVTX on Fri, 15 June 2012 14:44
		Re: [GMCnet] Here we go By: Ken Henderson on Fri, 15 June 2012 16:59
		Re: Here we go By: PettyVTX on Fri, 15 June 2012 14:40
		Re: Here we go By: PettyVTX on Fri, 15 June 2012 18:23
		Re: [GMCnet] Here we go By: Ken Henderson on Fri, 15 June 2012 20:12
		Re: [GMCnet] Here we go By: PettyVTX on Fri, 15 June 2012 20:21
		Re: [GMCnet] Here we go By: Ken Henderson on Fri, 15 June 2012 20:24
		Re: [GMCnet] Here we go By: George Zhookoff on Fri, 15 June 2012 21:10
		Re: [GMCnet] Here we go By: jhbridges on Sat, 16 June 2012 07:49
		Re: Here we go By: PettyVTX on Sat, 16 June 2012 08:29
		Re: [GMCnet] Here we go By: Ken Henderson on Sat, 16 June 2012 11:08
		Re: [GMCnet] Here we go By: jhbridges on Sat, 16 June 2012 11:43

Previous Topic:	[GMCnet] More Steering Column
Next Topic:	Peel and Stick Foam insulation

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Feb 02 08:41:48 CST 2025

Total time taken to generate the page: 0.00850 seconds