GMCforum: GMCnet » Bogie Pins:

Home » Public Forums » GMCnet » Bogie Pins:

Show: Today's Messages :: Polls :: Message Navigator

Bogie Pins: [message #172652]

Fri, 08 June 2012 20:23

noi

Messages: 293
Registered: October 2010
Location: South of Fremont

Karma:

Senior Member

Greetings:

For anyone who might be interested in seeing what a “freshly” pulled set of bogie pins looks like…. Here you go!!!!

Just got the left bogie pins out and for the most part, not looking good Crying or Very Sad

http://www.gmcmhphotos.com/photos/restoration/p44487-lb-inside.html

http://www.gmcmhphotos.com/photos/restoration/p44488-lb-outside.html

But will take them by JimK’s for a final determination!

Though the bogie “shims” looked in pretty good condition.

http://www.gmcmhphotos.com/photos/restoration/p44489-lb-shims.html

By looking at the pins, it really shows the importance of the aftermarket Bogie Pin Greaser Kit – As the majority of the “scoring” was on the bearing surface farthest away from the zerk fitting!

But what was also interesting was that the majority of the scoring was on the “inside”, bearing surfaces facing each other, and very little on the “outside” bearing surfaces facing away from each other.

I am now pretty curious as to how the right side bogie pins will look like.

Carl P.
76 Birchaven
South of Fremont

Report message to a moderator

[Message index]

		Bogie Pins: By: noi on Fri, 08 June 2012 20:23
		Re: [GMCnet] Bogie Pins: By: sgltrac on Fri, 08 June 2012 20:32
		Re: [GMCnet] Bogie Pins: By: jimk on Sat, 09 June 2012 01:55

Previous Topic:	steering related questions
Next Topic:	[GMCnet] MPG with 3.7 gear ratio (403 engine, hilly conditions)

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 06:48:56 CST 2024

Total time taken to generate the page: 0.00787 seconds