GMCforum: GMCnet » Re: [GMCnet] Front end geometry

Home » Public Forums » GMCnet » Re: [GMCnet] Front end geometry

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Front end geometry [message #170893]

Sat, 26 May 2012 13:12

Messages: 1262
Registered: September 2009

Karma:

Senior Member

I entered those arm length and frame/hub distance numbers in the website and got completely
different results. What am I missing? Here's what I got with horizontal, and 3 inches (76mm)
down and up:

http://www.gmcmhphotos.com/photos/member-galleries/p44314-one-ton-geometry.html

For what it's worth, our coach handles great with the one ton front end, even with a
really sloppy attempt at alignment. It was terrifying to drive before, now it's not.

confusedly,
Karen
1973 23'
1975 26'

> I went to the website and entered the dimensions for the 1 Ton upgrade using these numbers:
> Lower control arm length 14.75" or 375mm
> Upper control arm length 9.75" or 248mm
> Distance between mounting points on HUB 11" or 279mm
> Distance between mounting points on chassis 9" or 229mm
>
> The upper control arm is angled up 12.75 degrees when the
> bottom arm is level.
>
> The camber angle has a huge change from - 5 degrees to
> +2.5 degrees when moving 3 inches up to 3 inches down.
> That's 7.5 degrees of camber change

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Karen 1975 26' San Jose, CA

Report message to a moderator

[Message index]

		Re: [GMCnet] Front end geometry By: KB on Sat, 26 May 2012 13:12
		Re: [GMCnet] Front end geometry By: bwevers on Sat, 26 May 2012 15:00
		Re: [GMCnet] Front end geometry By: James Hupy on Sat, 26 May 2012 16:05
		Re: [GMCnet] Front end geometry By: USAussie on Sat, 26 May 2012 17:24
		Re: [GMCnet] Front end geometry By: k2gkk on Sat, 26 May 2012 17:45
		Re: [GMCnet] Front end geometry By: Kosier on Sat, 26 May 2012 22:06
		Re: [GMCnet] Front end geometry By: Matt Colie on Sun, 27 May 2012 09:30
		Re: [GMCnet] Front end geometry By: k2gkk on Sun, 27 May 2012 10:05
		Re: [GMCnet] Front end geometry By: Bob de Kruyff on Sun, 27 May 2012 09:59
		Re: [GMCnet] Front end geometry By: k2gkk on Sun, 27 May 2012 10:24
		Re: [GMCnet] Front end geometry By: Bob de Kruyff on Sun, 27 May 2012 10:41
		Re: [GMCnet] Front end geometry By: James Hupy on Sun, 27 May 2012 11:38
		Re: [GMCnet] Front end geometry By: Bob de Kruyff on Sun, 27 May 2012 12:34
		Re: [GMCnet] Front end geometry By: James Hupy on Sun, 27 May 2012 13:56
		Re: [GMCnet] Front end geometry By: James Hupy on Sat, 26 May 2012 17:47
		Re: [GMCnet] Front end geometry By: USAussie on Sat, 26 May 2012 18:29
		Re: [GMCnet] Front end geometry By: noi on Sat, 26 May 2012 18:38
		Re: [GMCnet] Front end geometry By: mike miller on Sat, 26 May 2012 18:59
		Re: [GMCnet] Front end geometry By: Bob de Kruyff on Sun, 27 May 2012 10:06
		Re: [GMCnet] Front end geometry By: Bob de Kruyff on Sun, 27 May 2012 09:52
		Re: [GMCnet] Front end geometry By: KB on Sat, 26 May 2012 17:09
		Re: [GMCnet] Front end geometry By: Surbo on Sat, 26 May 2012 22:38
		Re: [GMCnet] Front end geometry By: bwevers on Sat, 26 May 2012 17:18
		Re: [GMCnet] Front end geometry By: kingd on Sat, 26 May 2012 19:17
		Re: [GMCnet] Front end geometry By: bwevers on Sun, 27 May 2012 03:30
		Re: [GMCnet] Front end geometry By: Bob de Kruyff on Sun, 27 May 2012 10:10
		Re: [GMCnet] Front end geometry By: Bob de Kruyff on Sun, 27 May 2012 10:17
		Re: [GMCnet] Front end geometry By: Mr ERFisher on Sun, 27 May 2012 10:30
		Re: [GMCnet] Front end geometry By: USAussie on Sun, 27 May 2012 18:35
		Re: [GMCnet] Front end geometry By: Mr ERFisher on Sun, 27 May 2012 21:21
		Re: [GMCnet] Front end geometry By: sgltrac on Sun, 27 May 2012 19:41
		Re: [GMCnet] Front end geometry By: jimk on Sun, 27 May 2012 23:00
		Re: [GMCnet] Front end geometry By: Bob de Kruyff on Mon, 28 May 2012 08:54
		Re: [GMCnet] Front end geometry By: noi on Mon, 28 May 2012 17:40
		Re: [GMCnet] Front end geometry By: bwevers on Sun, 27 May 2012 23:11
		Re: [GMCnet] Front end geometry By: sgltrac on Mon, 28 May 2012 01:31
		Re: [GMCnet] Front end geometry By: bwevers on Sun, 27 May 2012 23:46
		Re: [GMCnet] Front end geometry By: sgltrac on Mon, 28 May 2012 01:29
		Re: [GMCnet] Front end geometry By: Mr ERFisher on Mon, 28 May 2012 09:09
		Re: [GMCnet] Front end geometry By: bwevers on Mon, 28 May 2012 09:39
		Re: [GMCnet] Front end geometry By: RF_Burns on Mon, 28 May 2012 20:33
		Re: [GMCnet] Front end geometry By: bwevers on Mon, 28 May 2012 20:45
		Re: [GMCnet] Front end geometry By: noi on Mon, 28 May 2012 21:06

Previous Topic:	Selling the Royale
Next Topic:	Sullybilt rear suspension update

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 11:45:51 CST 2024

Total time taken to generate the page: 0.00823 seconds