| Pork chop angles [message #170378] |
Mon, 21 May 2012 06:25  |
skip2
Messages: 544
Registered: September 2011
Location: Winter Haven,FL (center o...
Karma:
|
Senior Member |
|
|
Not realizing that there are 3 different angles available for pork chops I ordered one for the right side from Jim K and got rid of the slop in the TB area and help greatly with the right side heigth. Found a used one for the left with little wear in the TB area and it took out the slop but the ride heigth dropped, worse than the right side was originally.I've checked up in the A arms while it was apart and little wear up there maybe because of the grease fitting mod years ago by a PO, Jim K said that was probably done by a company out west. I'm guessing it was a diferent angle pork chop. So between the 23, 25.5, and 28 degree which is the greater mechanical advantage and gives more twist on the bar as far as increasing ride heigth. Thanks.
Skip Hartline
74 Canyon Lands, FiTech,
3.7 FD LSD, Manny Tranny,
Springfield Distributor,
2001 Chevy Tracker Ragtop Towd
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
