GMCforum: GMCnet » Exterior body panel work.

Home » Public Forums » GMCnet » Exterior body panel work.

Show: Today's Messages :: Polls :: Message Navigator

Exterior body panel work. [message #169937]

Wed, 16 May 2012 22:00

rssbob

Messages: 259
Registered: January 2004
Location: La Mesa, Ca. (San Diego a...

Karma:

Senior Member

I am going to replace the front section of plastic of my Palm Beach. It is the plastic piece below the front windows down to the bumper that also housed the headlights and parking lights.

I would like to know if there i a way to release the bonds that attach the front section to the front fenders, or do I just cut them apart with a cut-off saw and glass them back together from the inside?
Thanks,

Bob Sobrito
78 Palm Beach
La Mesa, Ca

Report message to a moderator

[Message index]

		Exterior body panel work. By: rssbob on Wed, 16 May 2012 22:00
		Re: [GMCnet] Exterior body panel work. By: sgltrac on Wed, 16 May 2012 23:07
		Re: [GMCnet] Exterior body panel work. By: rssbob on Thu, 17 May 2012 00:35
		Re: [GMCnet] Exterior body panel work. By: Mr ERFisher on Wed, 16 May 2012 23:26
		Re: [GMCnet] Exterior body panel work. By: USAussie on Thu, 17 May 2012 07:47
		Re: [GMCnet] Exterior body panel work. By: C Boyd on Thu, 17 May 2012 08:32
		Re: [GMCnet] Exterior body panel work. By: rssbob on Thu, 17 May 2012 10:04
		Re: [GMCnet] Exterior body panel work. By: mike miller on Thu, 17 May 2012 11:44
		Re: [GMCnet] Exterior body panel work. By: USAussie on Thu, 17 May 2012 16:41

Previous Topic:	Sighting
Next Topic:	1978 Royale

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 02 05:31:21 CDT 2024

Total time taken to generate the page: 0.06237 seconds