GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Electro level II advice
Electro level II advice [message #169330] Sat, 12 May 2012 08:32 Go to previous message
Galen is currently offline  Galen   United States
Messages: 146
Registered: November 2011
Location: New Virginia, IA
Karma:
Senior Member
I've had good fortune in all that I have had to repair since I bought my GMC last fall. Either that or I have maintained a positive attitude because I am enjoying it, or maybe both. I've been trying to put some miles on it to build my confidence in hopes I won't have to test out the Blacklist and my roadside assistance too soon. Yesterday, after getting new tires, we made a 100 mile round trip for a picnic and everything worked great (except the leveling). It's now time to take on the ELII (the two compressor system, right?).

The previous owner replace some line and put new bags on, so I know they did some work on it. I need to study the manuals and previous posts to really understand how this thing works.

The problem is that if I put it in auto, 1) the tell tale never goes out, and 2)after it self adjusts, the passenger side will be a noticeable few inches or so lower.

I can adjust it using the raise lower switches and put it in hold and it will stay where I set it.

Any advice on where to start?


Galen Briggs New Virginia, Iowa 1978 Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Electro level II advice
Next Topic: Coachman rear battery charging...
Goto Forum:
  


Current Time: Fri Oct 04 16:16:02 CDT 2024

Total time taken to generate the page: 0.02913 seconds