Pictures of Rockwell AL Manifold Installation [message #166539] |
Mon, 16 April 2012 20:03 |
Jon payne
Messages: 495 Registered: May 2008
Karma:
|
Senior Member |
|
|
Hi all,
I finally posted the pics of the Rockwell install. I noted some quality escapes as you will see. Sorry I did not take any pics of the gaskets installed on the intake prior to installation! For sure that was one of the more important steps to highlight being the concerns with the gaskets slipping. Anyway if you properly glue the gaskets on with 3M 08001 and install 3/8" x 2" bolts (heads cut off) on each end you should have no issues with the gaskets slipping. Oh, and I used Dick Patterson's gaskets with block-off plates.
Anyway, please see below link to the pictures and let me know what you guys think. Comments most welcome!
Jon
http://www.gmcmhphotos.com/photos/showphoto.php?photo=43848&title=rockwell-aluminum-inta&cat=6061
Jon Payne
76 Palm Beach
Westfield,IN
|
|
|