GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Sullybuilt bags issues
Sullybuilt bags issues [message #166498] Mon, 16 April 2012 11:46 Go to previous message
biggreen is currently offline  biggreen   United States
Messages: 347
Registered: June 2011
Location: Northeast Florida
Karma:
Senior Member
Just installed a set of the Sullybuilt brackets with the recommended Firestone bags. Good sturdy set-up and easy install.

Problem I'm having is there is no clearance on the inside of the bags to the wheelwells as these airsprings are of a much larger diameter than stock. One is a little tighter than the other, but both are rubbing.

My rear wheels are straight, my bogies are tight, I drove up and down the driveway, about 300 ft after putting wheels back on, and still no clearance.

Could "middle age spread" be the issue? http://gmcmotorhome.info/spread.html

The only solution I see is to modify the wheelwells to fit the airspring. Manufacturing a fiberglass inset and take advantage of the 1-2 inches behind the wells.

Anyone have a solution?

Thanks, RD 77 Palm Beach 403

[Updated on: Mon, 16 April 2012 11:50]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Parts for sale, - Wind wings, Screens for front windows, KYB rear shocks
Next Topic: [GMCnet] Ragusa
Goto Forum:
  


Current Time: Wed Nov 20 10:29:24 CST 2024

Total time taken to generate the page: 0.02306 seconds