Re: [GMCnet] best glue for wall and ceiling panels ?? [message #166105] |
Thu, 12 April 2012 08:53 |
Basheik
Messages: 34 Registered: January 2004
Karma:
|
Member |
|
|
Steve
I guess I missed your earlier posts and I'm wondering if you are
planning to put fabric over the existing finished ceiling panels ? If so,
are your existing panels in solid (firm) enough condition to support the
new fabric ? My ceiling fabric has delaminated from the panels and I doubt
if stripped, the underneath material would be in a condition to be
re-covered. Do you have pictures of yours ?
There have been several posts on replacing the ceiling panels but
as I remember they all completely replaced the total panels. If just
reapplying the fabric can be done, it would save a lot of work and material.
Would like to hear how it works out.
AndyM W PA
75 and 77 PB's
In a message dated 4/12/2012 1:56:45 A.M. Eastern Daylight Time,
zzdebz@yahoo.com writes:
Hello,
Yep you are right, it is available in 1 gallon cans, found some here also.
http://www.yourautotrim.com/noname37.html
I really wanted to avoid having to buy a spray gun, and borrow an air
compressor :d
But looks like for the sake of a lasting job, it may have to be done that
way..
We are putting fabric, on the wall panels and ceiling panels, just wanted
to find the solution that would not peel off.
cheers and beers :)
--
Steve & Debbie
Monticello, FL
77 Palm Beach :- Aurora
EX G4WDT
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|