GMCforum: GMCnet » [GMCnet] Onan control board

Home » Public Forums » GMCnet » [GMCnet] Onan control board

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Onan control board [message #162480]

Thu, 08 March 2012 16:46

nancy mercier

Messages: 62
Registered: February 2012

Karma:

Member

Now that my blower works, I'm going after the generator. Cranks but won't
start. I'm checking the solinoid by checking for 12 v between terminals 1
and 10...question is, there are two number 1 terminals. Which to use?

Also my number 6 is empty, no wires attatched...normal?

Thanks..Nancy
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Onan control board By: nancy mercier on Thu, 08 March 2012 16:46
		Re: [GMCnet] Onan control board By: Ken Henderson on Thu, 08 March 2012 17:03
		Re: [GMCnet] Onan control board By: emerystora on Thu, 08 March 2012 17:09
		Re: [GMCnet] Onan control board By: Steve Clevenger on Thu, 08 March 2012 17:32
		Re: [GMCnet] Onan control board By: Ken Henderson on Thu, 08 March 2012 17:40
		Re: [GMCnet] Onan control board By: Billy Massey on Thu, 08 March 2012 20:34
		Re: [GMCnet] Onan control board By: emerystora on Thu, 08 March 2012 17:04
		Re: [GMCnet] Onan control board By: MikeT on Thu, 08 March 2012 17:50
		Re: [GMCnet] Onan control board By: Bob de Kruyff on Thu, 08 March 2012 17:51

Previous Topic:	[GMCnet] GMCMI Spring Convention Tentative Schedule
Next Topic:	Noise Suppression Capacitor on Blower

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 14:46:50 CST 2024

Total time taken to generate the page: 0.00678 seconds