Home » Public Forums » GMCnet » Re: [GMCnet] The Markbag(tm)
Re: [GMCnet] The Markbag(tm) [message #150778] |
Sun, 27 November 2011 15:48 |
k2gkk
Messages: 4452 Registered: November 2009
Karma:
|
Senior Member |
|
|
Well, since I have one bag with an apparent slow leak, and
this Markbag(tm) system seems to retain man features of the
original system at quite a reasonable cost, I'd surely be
interested in being able to get the pieces "ready made" and
ready to install fairly simply!
Am I far off in thinking this might be a fairly simple job
if the necessary parts were available in a D-I-Y kit?
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> Date: Sun, 27 Nov 2011 13:21:31 -0800
> From: sgltrac@gmail.com
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] The Markbag(tm)
>
> I was thinking of looking into having the individual parts cut and bored
> by a fabrication shop that can set up a batch on automated equipment which
> would give a more uniform product in less time. A jet cut of some sort
> would eliminate the need to finish grind the standoffs and especially the
> plates. Also not sure of the demand. Kindof wondering what sort of interest
> there might be. I dont know what a shop might charge........yet
>
> Im going to weld up today and bring back to my body shop tomorrow and paint
> them. Once that is done I will post more pictures to the same picassa
> account since I had no luck with the GMC site
>
> Sully
> 77 Royale
>
>
>
> On Sun, Nov 27, 2011 at 12:56 PM, Dennis Sexton <dennisfsexton@aol.com>wrote:
>
> > Sully,
> >
> > Thank you for taking time to detail your install and put some numbers to
> > the height and pressure questions.
> >
> > Anyway to estimate what a shop might charge to fabricate the mountings?
> >
> > Looks very good.
> >
> > Dennis
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
Re: [GMCnet] The Markbag(tm)
By: k2gkk on Sun, 27 November 2011 15:48
|
|
|
Re: [GMCnet] The Markbag(tm)
By: sgltrac on Sun, 27 November 2011 16:35
|
|
|
Re: [GMCnet] The Markbag(tm)
By: k2gkk on Sun, 27 November 2011 17:02
|
|
|
Re: [GMCnet] The Markbag(tm)
By: SThornbg on Sun, 27 November 2011 18:06
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
By: mgrue on Sun, 27 November 2011 18:47
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
By: SThornbg on Sun, 27 November 2011 20:15
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
By: sgltrac on Mon, 28 November 2011 18:49
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
By: sgltrac on Mon, 28 November 2011 19:11
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
By: sgltrac on Mon, 28 November 2011 21:14
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
By: k2gkk on Tue, 29 November 2011 07:20
|
|
|
Re: [GMCnet] The Markbag(tm)
By: sgltrac on Tue, 29 November 2011 12:16
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
By: sgltrac on Tue, 29 November 2011 18:35
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
By: sgltrac on Wed, 30 November 2011 10:33
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
|
|
|
Re: [GMCnet] The Markbag(tm)
By: skip2 on Thu, 01 December 2011 06:47
|
|
|
Re: [GMCnet] The Markbag(tm)
By: sgltrac on Wed, 14 December 2011 14:19
|
Goto Forum:
Current Time: Sun Sep 22 07:23:02 CDT 2024
Total time taken to generate the page: 0.01093 seconds
|