Re: [GMCnet] How do i dismantle dash ??? [message #150597] |
Thu, 24 November 2011 11:30 |
sgltrac
Messages: 2797 Registered: April 2011
Karma:
|
Senior Member |
|
|
The whole thing will come out as one chunk if you disconnect the main harness at the firewall, loosen and partially drop steering column,pull the access cover behind the gauges to unhook vac lines/heater linkage. I have only pulled one and the windshield was out first. It is possible to remove with windshields in as many here have done so. When I pull the WarPigs dash here in a month or so I will pull the windshields as I have a fog free set to go in
Sully
77 royale
------Original Message------
From: steve & debbie
Sender: gmclist-bounces@temp.gmcnet.org
To: gmclist@temp.gmcnet.org
ReplyTo: gmclist@temp.gmcnet.org
Subject: [GMCnet] How do i dismantle dash ???
Sent: Nov 23, 2011 6:55 PM
Hello out there, i have parts of the dash broken, and i want to repair it. I have looked for photos showing how the whole thing comes apart but no joy. I notice that the lower part is riveted into the frame. Do you have to remove these rivets to dismantle ???
Regards
--
Steve & Debbie
Monticello, FL
77 Palm Beach
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sent from my Verizon Wireless BlackBerry
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|