[GMCnet] Changing Onan Output to 220VAC [message #147872] |
Wed, 26 October 2011 19:40 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma:
|
Senior Member |
|
|
G'day,
I was perusing a list of old GMCnet contributions when I ran across this:
***********************************************************************************
How do I get 220 volts out of my Onan?
I (actually my chief engineer) split the two coils to provide separate 110 to two separate circuits. Two 110 hots and a ground give
you 220 if needed. In the installation manual for BGE, NHE Gensets Manual #965-0628 of 2-92 page 7-4 the schematic #611-1206 for
60HZ generator.
He moved:
T4 From L0 to L2
T3 From L1 to L0
CB2 From L1 to L2
This is a totally unauthorized switch and what you do is up to you.
***********************************************************************************
Comments appreciated.
Regards,
Rob M.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|