[GMCnet] Q Jet Primary Rods for 1976 GMC [message #142898] |
Fri, 09 September 2011 16:04 |
Arthur Mansfield
Messages: 290 Registered: April 2010
Karma:
|
Senior Member |
|
|
I found a listing for the 1976 GMC Q Jet. If I read it correctly my carb (7045245) is supposed to have rods that are .038 but they are .050. The .038 would provide a.002714 area orifice which seems to rich. I have another Q Jet of off a car 455 and it has an area orifice area of .002299. The .050 rods (reads 50 and measures .050) would give a orifice area of .001963 which seems lean. If I go to .073 jets with the ,050 rods will give me .002222 orifice area which would seem better ut may be a little on the rich side.. I wonder what size primary rod the is used in the 1976 GMC RV? Is the 038 correct or is the .050 correct? The tip size is .036 which I believe is supposed to be correct for all 76 and latter carbs. I installed .073 jets and will give them a try.
Art & Doris
76 EL
Decatur Al
256 476 9723
amansfield1104@charter.net
1104agm@gmail.com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|