| Vacuum Lines [message #142414] |
Mon, 05 September 2011 00:17  |
Chr$
Messages: 2690
Registered: January 2004
Location: Scottsdale, AZ
Karma:
|
Senior Member |
|
|
Anyone got a good photo of where everything connects to the vacuum stuff? I'm thinking I have the modulator connected wrong, as the tranny doesn't quite seem to shift right. All the diagrams I find out there are no help. I took this all apart so many months ago, and some of my labels disappeared, and I cannot find the photos I took. It probably wasn't connected right anyway.
a good shot of the intake and carb from above without the air cleaner would be a great help.
I did not reinstall the Throttle return thing, as it seems silly and was cracked anyway, Nor did I reconnect the thing with the big spring at the front Left by the alternator.
All I have reconnected is the TVS, Trans Modulator, and Distributor Advance, along with the other useless heat door on the air cleaner. The DIst advance does change with vacuum (tested this), so I am in the ballpark.
The Service manual is pretty useless too.
Thanks.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
