GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » [GMCnet] Jim K, Jim B, or anyone else
[GMCnet] Jim K, Jim B, or anyone else [message #140673] Tue, 23 August 2011 17:26 Go to previous message
SergeL is currently offline  SergeL   United States
Messages: 169
Registered: January 2011
Karma:
Senior Member
I am disassembling a ladder and rail from my 1973 GMC, the ladder steps are
assembled using roll pin or fittings that are punched into the step through
the ladder tubing. How do I remove the roll pin, there are no holes on the
back side of the step so I can't keep pushing them through. Any suggestions
on this? They are spring steel so drilling will not work.
Also is there a seam in the ladder tubing hidden behind the steps on the
ladder or are the tube pieces one piece? The reason I ask this is because
some of the braces that attach the ladder to the coach back or roof will not
come off since they will not slip around the bend in the tubing, makes me
think there must be a hidden joint where these can slip off.

Thanks for any help


Serge
1973 GMC
Deming, NM


He who expects no gratitude shall never be disapointed
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Just curious
Next Topic: correction on formica for ceiling panels
Goto Forum:
  


Current Time: Fri Feb 28 12:02:07 CST 2025

Total time taken to generate the page: 0.00828 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software