GMCforum: GMCnet » Rear spindle nut tightening specs

Home » Public Forums » GMCnet » Rear spindle nut tightening specs

Show: Today's Messages :: Polls :: Message Navigator

Rear spindle nut tightening specs [message #140524]

Mon, 22 August 2011 19:28

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

I'm looking for the method of setting the rear spindle nuts. All I can find in the manual is on page 5-46 of the brake section where it says 25-30ft lbs. I think that is too much.

I thought you bring it up to so much then back it off to the first castellated slot.

can anyone point me in the right direction.

Thanks

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Rear spindle nut tightening specs By: RF_Burns on Mon, 22 August 2011 19:28
		Re: Rear spindle nut tightening specs By: C Boyd on Mon, 22 August 2011 19:36
		Re: Rear spindle nut tightening specs By: RF_Burns on Mon, 22 August 2011 19:39
		Re: Rear spindle nut tightening specs By: C Boyd on Mon, 22 August 2011 19:41
		Re: [GMCnet] Rear spindle nut tightening specs By: USAussie on Mon, 22 August 2011 19:50
		Re: Rear spindle nut tightening specs By: RF_Burns on Mon, 22 August 2011 20:17
		Re: [GMCnet] Rear spindle nut tightening specs By: Mr ERFisher on Tue, 23 August 2011 05:33
		Re: [GMCnet] Rear spindle nut tightening specs By: GMC_LES on Tue, 23 August 2011 15:39
		Re: Rear spindle nut tightening specs By: RF_Burns on Tue, 23 August 2011 07:44
		Re: Rear spindle nut tightening specs By: Ken Burton on Tue, 23 August 2011 08:14
		Re: [GMCnet] Rear spindle nut tightening specs By: Ken Henderson on Tue, 23 August 2011 08:16
		Re: Rear spindle nut tightening specs By: RF_Burns on Tue, 23 August 2011 15:25

Previous Topic:	[GMCnet] Final Drive Question
Next Topic:	Remote trans. cooler

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Oct 04 02:34:43 CDT 2024

Total time taken to generate the page: 0.00629 seconds