GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Axle Bolts
Axle Bolts [message #139281] Mon, 15 August 2011 13:05 Go to previous message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma:
Senior Member
Don't forget to check the axle bolts every now and then. I have known of at least two guys losing an axle. While waiting on Ken B. this morning I was checking everything on the engine for tightness. I had just checked the axle bolts 1000 miles back. I was surprised to find the driver's side all loose, I mean nearly finger tight. The passenger side was ok. I have in the past wired these things. I am thinking that will happen again when I get home.
See everyone in about 3 weeks. I guess I better pay up or I will have a late charge for the convention. I think the deadline is this week.
Dan


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Front End/Steering Box
Next Topic: Stuck again...! Temp sensor failed, engine hot, won't start
Goto Forum:
  


Current Time: Mon Sep 30 03:34:02 CDT 2024

Total time taken to generate the page: 0.00918 seconds