GMCforum: GMCnet » How do you get the AC evap out??

Home » Public Forums » GMCnet » How do you get the AC evap out??

Show: Today's Messages :: Polls :: Message Navigator

How do you get the AC evap out?? [message #138262]

Wed, 10 August 2011 11:28

Keith V

Messages: 2337
Registered: March 2008
Location: Mounds View,MN

Karma:

Senior Member

I dug into my AC unit last night.
Pulled the heater core and tried to pull the evap.

This is on a '75 transmode with a recirculation Door

I found 6 screws holding it all together, 2 up by the Fan, 2 on the drivers side under the heater core and 2 holding the metal lines onto the airbox.

It still wouldn't budge.

What am I missing? Did GM use those special high inaccessiem screws again?

I did loosen the bottom of the box and felt behind the evaporator and it feels clean, and blowing compressed air though it only blew out a few bugs. So I may not NEED to remove it....

Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com

Report message to a moderator

[Message index]

		How do you get the AC evap out?? By: Keith V on Wed, 10 August 2011 11:28
		Re: [GMCnet] How do you get the AC evap out?? By: Ken Henderson on Wed, 10 August 2011 11:42
		Re: [GMCnet] How do you get the AC evap out?? By: jade on Wed, 10 August 2011 13:05
		Re: [GMCnet] How do you get the AC evap out?? By: Keith V on Wed, 10 August 2011 13:56
		Re: [GMCnet] How do you get the AC evap out?? By: C Boyd on Wed, 10 August 2011 14:37
		Re: [GMCnet] How do you get the AC evap out?? By: idrob on Wed, 10 August 2011 15:58

Previous Topic:	Re: [GMCnet] What not to do when repainting a 1973 GMC Photo Log
Next Topic:	[GMCnet] The Woody Look on a GMC

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 01 04:26:15 CDT 2024

Total time taken to generate the page: 0.01085 seconds