GMCforum: GMCnet » genny output related question

Home » Public Forums » GMCnet » genny output related question

Show: Today's Messages :: Polls :: Message Navigator

Fri, 22 July 2011 16:55

chasingsummer

Messages: 434
Registered: May 2011
Location: asheboro, nc

Karma:

Senior Member

i plan to add second 2 inch receiver to coach for my grill, present hitch is welded so i assume i will weld other one on also. so welding questions came up.
will my 6k ginny run a 110 wire fed flux core welder to spot unit on, otherwise i need long extension card.
aslo related, any precautions reference to disconnection battery grounds or anythings else as not to creat new problems, plan is to tack on for fit and placement, then have someone with proper stick welder make permmenate
all input is appreciated, grill is approx 30 lbs and swing arm adds another 25 or so.
thanks brian

brian asheboro, nc 75 eleganza, 74 build 119k miles and counting, DOG HOUSE

Report message to a moderator

[Message index]

		genny output related question By: chasingsummer on Fri, 22 July 2011 16:55
		Re: [GMCnet] genny output related question By: Gary Worobec on Fri, 22 July 2011 17:10
		Re: [GMCnet] genny output related question By: James Hupy on Fri, 22 July 2011 17:28
		Re: genny output related question By: mike miller on Fri, 22 July 2011 19:48

Previous Topic:	[GMCnet] Olds Toronado Oil Pan
Next Topic:	Wierd Onan issue

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 30 09:27:17 CDT 2024

Total time taken to generate the page: 0.01998 seconds