GMCforum: GMCnet » Alternator belt tensioner mod.

Home » Public Forums » GMCnet » Alternator belt tensioner mod. (Uploaded more pics.)

Show: Today's Messages :: Polls :: Message Navigator

Alternator belt tensioner mod. [message #134888]

Sun, 17 July 2011 00:52

spiffycar

Messages: 133
Registered: May 2010
Location: Brook Park ,Ohio

Karma:

Senior Member

I have uploaded a few more pics into a new album on the photo site for those that were interested in the tensioner mod I did on the alternator bracket. It should be pretty straight forward for anyone who knows how to drill a hole in something. Rolling Eyes

Just make sure you drill the hole for the thrust base as close as possible to the bottom of the adjusting slot. If you drill it too low you will run into the lockdown bolt hitting the engine bracket and limiting the "pivoting" movement of the adjuster. You may also need to shim the thrust base out with a washer or two in order to make sure the adjuster bolt lines up in the divot of the base properly. Good luck and happy one handed belt adjusting! Surprised

Paul W L
76 Daytona Beach! ( EX-Palm Beach )
Cleveland,OH
& Current Card Carrying Pull A Part VIP Member

Report message to a moderator

[Message index]

		Alternator belt tensioner mod. By: spiffycar on Sun, 17 July 2011 00:52
		Re: [GMCnet] Alternator belt tensioner mod. By: Mr ERFisher on Sun, 17 July 2011 04:58
		Re: Alternator belt tensioner mod. By: mike miller on Sun, 17 July 2011 19:36
		Re: Alternator belt tensioner mod. By: GeorgeRud on Sun, 17 July 2011 19:46

Previous Topic:	[GMCnet] belt tensioner
Next Topic:	[GMCnet] Onan 4kw Carb. Number

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Mar 04 11:19:32 CST 2025

Total time taken to generate the page: 0.00723 seconds