GMCforum: GMCnet » choke on genny question

Home » Public Forums » GMCnet » choke on genny question

Show: Today's Messages :: Polls :: Message Navigator

choke on genny question [message #132023]

Sat, 25 June 2011 21:24

chasingsummer

Messages: 434
Registered: May 2011
Location: asheboro, nc

Karma:

Senior Member

75 coach with 6k generator. coil gets the 12 volts but arm does not move, i think i saw mwntioned on line somewhere about and adjustment, as if coil could be rotated? once warm genny seems to run good so i dont really want to buy an electric choke if i can help it
also somewhat related, i saw a listing somewhere that had a small schematic related to priming the carb for remote operation, it involved adding another switch to remote panel, fused, then diode to stop reverse power, it received 12vdc from panel and somehow i guess ran the fule pump momentaryily to ease in start up. does this really help? where on genny is this 12 vdc connected?
thanks bgk

brian asheboro, nc 75 eleganza, 74 build 119k miles and counting, DOG HOUSE

Report message to a moderator

[Message index]

		choke on genny question By: chasingsummer on Sat, 25 June 2011 21:24
		Re: choke on genny question By: Dennis S on Sat, 25 June 2011 21:28
		Re: choke on genny question By: mike miller on Sun, 26 June 2011 02:23
		Re: choke on genny question By: chasingsummer on Sun, 26 June 2011 11:20
		Re: choke on genny question By: mike miller on Sun, 26 June 2011 11:26
		Re: [GMCnet] choke on genny question By: emerystora on Sun, 26 June 2011 11:30
		Re: [GMCnet] choke on genny question By: jimk on Sun, 26 June 2011 12:26
		Re: choke on genny question By: chasingsummer on Mon, 27 June 2011 20:55
		Re: choke on genny question By: mike miller on Tue, 28 June 2011 02:44

Previous Topic:	[GMCnet] Instrument Cluster
Next Topic:	[GMCnet] Coach dimensions (redux?)

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Oct 14 15:21:12 CDT 2024

Total time taken to generate the page: 0.00753 seconds