[GMCnet] new converter and fuse block [message #129844] |
Sun, 12 June 2011 14:46 |
john arbuckle
Messages: 122 Registered: March 2010
Karma:
|
Senior Member |
|
|
I have purchased a new PD9260C converter and a blue sea blade fuse
block with neg bus. I am a novice at electrical wiring. I have a 1976
Palm beach and have removed the old converter some time ago. I have
the converter with the power plug which I know plugs into an outlet.
The I would connect a positive wire from the converter to the positive
terminal on the fuse block. Do I wire the neg. to a ground or to the
neg bus on the fuse block, and then run another wire from the neg bus
to the frame? A little confused on the entire project. Then the new
fuse block has all the terminals to connect the different devices
called positive feeds, and negative returns at the top of the block?
If there is a way to explain it in lame terms for me it would help me
a great deal. So please anyone with the knowledge it would be
appreciated. Thank you again.
John Arbuckle
1976 Palm Beach
Tucson AZ
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|