| Isolation pads [message #128307] |
Thu, 02 June 2011 10:15  |
thorndike
Messages: 406
Registered: January 2011
Location: Conifer, Colorado
Karma:
|
Senior Member |
|
|
Good afternoon,
Well, I am going to be changing my isolation pads this weekend (I hope) and have an issue, of course.
I have sent a message to the Curtis' but haven't heard back yet, so I thought I would ask this robust body of knowledge.
I received the following pads from Bill and Fay:
18 - 3/4" x 3" x 6"
2 - 5/8" x 3" x 6"
2 - 3/8" x 3" x 6"
and
3 - 3/8" x 2" x 4"
First, I am concerned that I received 3 of one size. Since the pads are mirrored left and right, I have either received one too many, or I am one short.
Second, the instructions say: "1/2 pads stack on full pad back by rear wheels inboard of main frame rail to compensate for frame step down". Well, I don't have any 1/2" pads so I am not sure what to make of this note out of the pads I received.
This is on a '76 Royale.
Any clarifications would be appreciated!
Bob
Robert Peesel
1976 Royale 26'
Side Dry Bath
Conifer, Colorado
[Updated on: Thu, 02 June 2011 10:15] Report message to a moderator |
|
|
|
GMCforum
Search
Help
Register
Login
Home
