GMCforum: GMCnet » Steering Box Issue

Home » Public Forums » GMCnet » Steering Box Issue

Show: Today's Messages :: Polls :: Message Navigator

Steering Box Issue [message #126496]

Tue, 17 May 2011 19:41

Rickmo

Messages: 105
Registered: January 2011
Location: Gladwin, Michigan

Karma:

Senior Member

While my engine is being rebuilt, I am taking the opportunity to check out the loose spot in my steering. I checked all the ball joints, tie rod ends etc and they are all like new and tight. When I turn the wheel the shaft going into the steering box turns but the output shaft attached to what I am calling the pitman arm does not turn at all. It only turns when I turn the wheel beyond the loose spot which is about 2 inches either way. Can the box be adjusted or is it just shot?

Rick Seebeck Gladwin Michigan 1973 Canyon Lands

Report message to a moderator

[Message index]

		Steering Box Issue By: Rickmo on Tue, 17 May 2011 19:41
		Re: [GMCnet] Steering Box Issue By: USAussie on Tue, 17 May 2011 20:13
		Re: [GMCnet] Steering Box Issue By: Ken Henderson on Tue, 17 May 2011 20:51
		Re: Steering Box Issue By: RF_Burns on Wed, 18 May 2011 10:42
		Re: Steering Box Issue By: Bob de Kruyff on Mon, 23 May 2011 22:38

Previous Topic:	Ice Maker
Next Topic:	Refrigerator Available

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 08:51:04 CST 2024

Total time taken to generate the page: 0.00917 seconds