[GMCnet] CHEVY ONE-TON FRONT END KIT [message #124572] |
Wed, 04 May 2011 12:22 |
mannystrans
Messages: 209 Registered: June 2006
Karma:
|
Senior Member |
|
|
CHEVY ONE-TON FRONT END KIT
This is the Chevy One-Ton front end that Bill Hubler created.
I decided to streamline the kit with new parts to make it more
affordable by buying the parts at quantity prices.
We have over 100 knuckles and more are arriving almost everyday.
The drawback is the lower control arms that I don't have enough in stock. So
I have to charge a ($300) core charge so you will return your old arms..
So once the kit is installed and the arms are returned, you'll get
your core charge back.
The kit is $1570.00 each, for the first 50 sets.
The kit includes everything you will need, but, does not include the
80mm calipers, pads, or the brake hoses. These can be supplied upon
request.
I also have some tie rod ends if needed.
--
Manny Trovao
mannystrans@gmail.com
Manny's Trans / Power Drive
San Jose, California
408-937-1583
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|