GMCforum: GMCnet » Torsion Adjustment Arm

Home » Public Forums » GMCnet » Torsion Adjustment Arm

Show: Today's Messages :: Polls :: Message Navigator

Torsion Adjustment Arm [message #121486]

Sun, 10 April 2011 22:44

thorndike

Messages: 406
Registered: January 2011
Location: Conifer, Colorado

Karma:

Senior Member

Now that I am back working on my GMC (gas prices be damned), I have another question.

As I was attempting to install my new stabilizer bar bushings, I noticed what I believe is an issue with the Torsion Adjustment Arms. On one of the arms, the adjustment bolt was extended about 2" below the bottom of the frame, while the other was not. I am assuming that this is an issue that could have added to the steering problems that I had when bringing the coach back from Az.

A quick education on this topic would be GREATLY appreciated.

As usual, THANKS!

Bob

Robert Peesel 1976 Royale 26' Side Dry Bath Conifer, Colorado

[Updated on: Sun, 10 April 2011 22:45]

Report message to a moderator

[Message index]

		Torsion Adjustment Arm By: thorndike on Sun, 10 April 2011 22:44
		Re: Torsion Adjustment Arm By: Rick Williams on Mon, 11 April 2011 05:18
		Re: Torsion Adjustment Arm By: thorndike on Mon, 11 April 2011 08:51
		Re: Torsion Adjustment Arm By: Ken Burton on Mon, 11 April 2011 09:59
		Re: Torsion Adjustment Arm By: Bob de Kruyff on Fri, 15 April 2011 22:04

Previous Topic:	[GMCnet] 1978 GMC Coca Cola Gadabout on ePay
Next Topic:	does synthetic trans fluid lower temps?

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 02 11:20:35 CDT 2024

Total time taken to generate the page: 0.00971 seconds