GMCforum: GMCnet » [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC.

Home » Public Forums » GMCnet » [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. [message #120086]

Sat, 26 March 2011 23:02

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma:

Senior Member

So when I started to place 30 or so, small bits of LED light in my 2 GMCs, I
knew I had a problem. This was going to be a lot of work, and I had many
types of LED lights ,and switches, to install, from Puck lights, West Marine
lights, and misc other types of LED assemblies.
http://www.gmcmhphotos.com/photos/showphoto.php?photo=37439&title=12-volt-led-puck-light&cat=5691
OR
http://goo.gl/jGYhc

There was GMC wiring at every location (almost;>) but the wire size was way
too large, and the connectors were either in use or just horrible (30 years
old and for 3-6 amps)
so

I determined that I had to have a unified way to wire in the LEDs without ,
soldering, wire nuts, etc. So this what I used , because it is very small,
very fast, does not require cutting existing wiring, and causes no problems

This is what I use:
http://www.gmcmhphotos.com/photos/showphoto.php?photo=38076&nocache=1
OR
http://goo.gl/NophY

JWID
gene

--
Gene Fisher -- 74-23,77PB/ore/ca
�Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Mr ERFisher on Sat, 26 March 2011 23:02
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Douglas Norton on Sun, 27 March 2011 15:27
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Mr ERFisher on Sun, 27 March 2011 15:28
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: WD0AFQ on Sun, 27 March 2011 15:41
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Douglas Norton on Sun, 27 March 2011 15:46
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: RF_Burns on Sun, 27 March 2011 16:06
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: JohnL455 on Sun, 27 March 2011 17:18
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Firefly on Sun, 27 March 2011 18:37
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Mr ERFisher on Sun, 27 March 2011 18:40
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: RF_Burns on Sun, 27 March 2011 21:12
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Mr ERFisher on Sun, 27 March 2011 21:14
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Douglas Norton on Mon, 28 March 2011 00:19
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Mr ERFisher on Mon, 28 March 2011 03:03
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: RF_Burns on Mon, 28 March 2011 07:23
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: lqqkatjon on Mon, 28 March 2011 09:37
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: rallymaster on Mon, 28 March 2011 11:54
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Keith V on Mon, 28 March 2011 13:00
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: James Hupy on Mon, 28 March 2011 15:27
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Matt Colie on Mon, 28 March 2011 19:47
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Gary Berry on Mon, 28 March 2011 21:14
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: emerystora on Mon, 28 March 2011 21:44
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Gary Berry on Mon, 28 March 2011 22:07
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: mike miller on Mon, 28 March 2011 22:49
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Gary Berry on Tue, 29 March 2011 00:32
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: emerystora on Mon, 28 March 2011 22:54
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Mr ERFisher on Mon, 28 March 2011 22:56
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: USAussie on Tue, 29 March 2011 00:00
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Mr ERFisher on Tue, 29 March 2011 05:07
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: USAussie on Tue, 29 March 2011 09:03
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: James Hupy on Tue, 29 March 2011 03:41
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Douglas Norton on Mon, 28 March 2011 23:17
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: RF_Burns on Tue, 29 March 2011 07:13
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Gary Casey on Tue, 29 March 2011 07:32
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: James Hupy on Tue, 29 March 2011 09:05
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: n6mon on Tue, 29 March 2011 10:39
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Matt Colie on Tue, 29 March 2011 09:14
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: James Hupy on Tue, 29 March 2011 09:18
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Richard Denney on Tue, 29 March 2011 10:30
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: mike miller on Tue, 29 March 2011 11:29
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: k2gkk on Tue, 29 March 2011 11:49
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Gary Casey on Tue, 29 March 2011 12:38
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Ken Henderson on Tue, 29 March 2011 13:48
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: emerystora on Tue, 29 March 2011 14:02
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: James Hupy on Tue, 29 March 2011 14:59
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Bob de Kruyff on Tue, 29 March 2011 15:19
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: emerystora on Tue, 29 March 2011 15:23
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: comcast on Tue, 29 March 2011 16:31
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Matt Colie on Tue, 29 March 2011 17:04
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Matt Colie on Tue, 29 March 2011 17:21
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Ken Henderson on Tue, 29 March 2011 18:13
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Douglas Norton on Wed, 30 March 2011 00:28
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: James Hupy on Wed, 30 March 2011 03:06
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: gordh1 on Tue, 29 March 2011 16:37
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Jim Wagner on Wed, 20 April 2011 21:51
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Mr ERFisher on Wed, 20 April 2011 22:10
		Free By: bukzin on Thu, 21 April 2011 07:17
		Re: [GMCnet] Free By: Mr ERFisher on Thu, 21 April 2011 09:05
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: gmcrv1 on Thu, 21 April 2011 07:21
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Mr ERFisher on Thu, 21 April 2011 09:02
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: Jim Wagner on Thu, 21 April 2011 14:06
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: gmcrv1 on Thu, 21 April 2011 15:16
		Re: [GMCnet] A UNIFIED APPROACH FOR LED WIRING, in a GMC. By: RF_Burns on Thu, 21 April 2011 16:53

Previous Topic:	Bean Station
Next Topic:	Re: [GMCnet] Bento

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 16:44:16 CST 2024

Total time taken to generate the page: 0.00690 seconds