| Oil Cooler Line Adapter [message #118918] |
Tue, 15 March 2011 19:29  |
 |
WD0AFQ
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma:
|
Senior Member |
|
|
Are there three bolts holding the adapter onto the block for the oil cooler lines, 455? I have had a leak on this trip and it blew around on the right side, passenger's side. I can find nothing leaking but keep having a drip on the oil filter. I can not really see the adapter good but did find 3 bolts. They were loose. I snugged them back up hoping to stop the drip. Oil on the starter but none on the cooler lines, then blows back onto the torsion bar. I can't tell how bad because of the blowing of it backwards. There is no visable leaks anywhere that I can see but drips off the filter. I recall John saying he had to retighten one of the lines going into the adapter but now wonder if he just did not snug these bolts enough or they have come loose like headers and tappet covers do.
Thanks,
Dan,
doing the 1000 mile oil change in the morning, after changing the filter at 500.
3 In Stainless Exhaust Headers
One Ton All Discs/Reaction Arm
355 FD/Quad Bag/Alum Radiator Manny Tran/New eng.
Holley EFI/10 Tire Air Monitoring System
Solarized Coach/Upgraded Windows
Satelite TV/On Demand Hot Water/3Way Refer
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
