GMCforum: GMCnet » Flat Tappets Flatening Cams

Home » Public Forums » GMCnet » Flat Tappets Flatening Cams (Carcraft Mag)

Show: Today's Messages :: Polls :: Message Navigator

Flat Tappets Flatening Cams [message #118439]

Fri, 11 March 2011 13:19

g.winger

Messages: 792
Registered: February 2008
Location: Warrenton,Missouri

Karma:

Senior Member

This is comparing apples and oranges,,,,but. May Carcraft mag has an article on tha SBC 400. On page 28 they show a foto and text on how they ground down a new cam in 25 min. That being carefull with time tested breakin procedures. They used 130-340 (closed-open) springs and blame the "to much spring pressure" as the cause. Of course we don't use that much spring,,,,but I thought it intresting that even CC can grind down a cam that fast.,,,,,PL (What I meant by apples/oranges is we don't run that much spring)

Report message to a moderator

[Message index]

		Flat Tappets Flatening Cams By: g.winger on Fri, 11 March 2011 13:19
		Re: [GMCnet] Flat Tappets Flatening Cams By: James Hupy on Fri, 11 March 2011 13:45

Previous Topic:	[GMCnet] OT:Tsunami Alert
Next Topic:	Re: [GMCnet] Hensley GMC Motorhome Airbag Solution

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 17:27:48 CST 2024

Total time taken to generate the page: 0.00493 seconds