GMCforum: GMCnet » Intake Manifold Question

Home » Public Forums » GMCnet » Intake Manifold Question (It's about the bolts)

Show: Today's Messages :: Polls :: Message Navigator

Intake Manifold Question [message #116698]

Sat, 26 February 2011 19:24

JShot

Messages: 485
Registered: October 2006
Location: NW Ohio

Karma:

Senior Member

Our 455 intake manifold was bolted down with 12 bolts - 9 long and 3 short ones. Also, the bolt heads had different markings - a few were grade 8 and some were grade 5.

Should all the bolts be the same length, or are 3 of them short because of the thickness of the manifold at those points? And if I replace all of the bolts with new, is grade 5 ok?

Thanks,
John

John Shotwell
Ridgeville Corners, OH
78 Royale Center Kitchen

Report message to a moderator

[Message index]

		Intake Manifold Question By: JShot on Sat, 26 February 2011 19:24
		Re: [GMCnet] Intake Manifold Question By: USAussie on Sat, 26 February 2011 19:52
		Re: [GMCnet] Intake Manifold Question By: JShot on Sat, 26 February 2011 20:56
		Re: [GMCnet] Intake Manifold Question By: Dennis S on Sat, 26 February 2011 21:04
		Re: [GMCnet] Intake Manifold Question By: JShot on Sat, 26 February 2011 21:20
		Re: [GMCnet] Intake Manifold Question By: USAussie on Sat, 26 February 2011 23:34
		Re: [GMCnet] Intake Manifold Question By: Ken Henderson on Sun, 27 February 2011 00:30
		Re: [GMCnet] Intake Manifold Question By: USAussie on Sun, 27 February 2011 00:54
		Re: [GMCnet] Intake Manifold Question By: Ken Henderson on Sun, 27 February 2011 01:04
		Re: [GMCnet] Intake Manifold Question By: JShot on Sun, 27 February 2011 07:22
		Re: [GMCnet] Intake Manifold Question By: George Beckman on Sun, 27 February 2011 09:32

Previous Topic:	[GMCnet] Air tank size
Next Topic:	[GMCnet] Feeling the GMC Love

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 02 10:25:17 CDT 2024

Total time taken to generate the page: 0.01023 seconds